Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Model assembly
Float installation
Screws 3*4
1. Install the struts onto the floats as shown- using the hardware
provided with the float set. Secure the float assembly using
screws.
HKM3.0*10
2. Using the screws and plastic retainers shown, secure the
float assembly to the fuselage.
Battery installation
1. Remove the battery hatch.
2. Remove the hook and loop tape from the fuselage. Apply the
looped surface to the battery.
3. Install the battery into the fuselage- securing it with the
preinstalled battery straps.
Note: The weight of each battery may vary due to different
manufacturing techniques. Move the battery fore or aft to
achieve the optimal center of gravity.
7
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
