Set The Root Password - Axis Communications A1001 Installationsanleitung

AXIS A1001 Network Door Controller
Assign IP Address Using ARP/Ping
The product's IP address can be assigned using ARP/Ping. The command must be issued within 2
minutes of connecting power.
1. Acquire a free static IP address on the same network segment as the computer.
2. Locate the serial number (S/N) on the product label.
3. Open a command prompt and enter the following commands:
Linux/Unix syntax
arp -s <IP address> <serial number> temp
ping -s 408 <IP address>
Linux/Unix example
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
Windows syntax (this may require that you run the command prompt as an
administrator)
arp -s <IP address> <serial number>
ping -l 408 -t <IP address>
Windows example (this may require that you run the command prompt as an
administrator)
arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125
4. Check that the network cable is connected and then restart the product by disconnecting
and reconnecting power.
5. Close the command prompt when the product responds with Reply from
192.168.0.125:... or similar.
6. Open a browser and type http://<IP address> in the Location/Address field.
Note
• To open a command prompt in Windows, open the Start menu and type cmd in the
Run/Search field.
• To use the ARP command in Windows 8/Windows 7/Windows Vista, right-click the
command prompt icon and select Run as administrator.
• To open a command prompt in Mac OS X, open the Terminal utility from Application >
Utilities.

Set the Root Password

To access the Axis product, you must set the password for the default administrator user root.
This is done in the Configure Root Password dialog, which opens when the product is accessed
for the first time.
38