Access From The Internet; Assign An Ip Address - Axis Communications A1001 Installationsanleitung

Access from a Browser
1. Start a browser (Internet Explorer, Firefox, Safari).
2. Enter the IP address or host name of the Axis product in the browser's Location/Address
field. To access the product from a Macintosh computer (Mac OS X), click on the Bonjour
tab and select the product from the drop-down list.
If you do not know the IP address, use AXIS IP Utility to locate the product on the network.
For information about how to discover and assign an IP address, see Assign an IP Address.
This information is also available from the support pages on www.axis.com/techsup
3. Enter your user name and password. If this is the first time the product is accessed, the
root password must first be configured. For instructions, see Set the Root Password on
page 38.
4. AXIS Entry Manager opens in your browser. The start page is called the Overview page.

Access from the Internet

Once connected, the Axis product is accessible on your local network (LAN). To access the product
from the Internet you must configure your network router to allow incoming data traffic to the
product. To do this, enable the NAT-traversal feature, which will attempt to automatically configure
the router to allow access to the product. This is enabled from Setup > Additional Controller
Configuration > System Options > Network > TCP/IP > Advanced.
For more information about NAT trasversal for IPv4, see the product's User Manual. See also AXIS
Internet Dynamic DNS Service at www.axiscam.net
For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup

Assign an IP Address

Default IP Address
The Axis product is designed for use on an Ethernet network and requires an IP address for access.
Most networks have a DHCP server that automatically assigns IP addresses to connected devices.
If your network does not have a DHCP server the Axis product will use 192.168.0.90-95 as
the default IP address.
Recommended Methods in Windows®
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis
products on the network and assigning them IP addresses in Windows®. Both applications are free
and can be downloaded from www.axis.com/techsup
AXIS A1001 Network Door Controller
35