Axis Communications A1001 Installationsanleitung Seite 37

5. The first time AXIS Camera Management runs it automatically searches for Axis products
on the network. To manually search for products, select Configuration > Add Devices.
The software displays a list of the products found.
Select the products to add and click Next and then click Finish.
6. In the list of devices, click on the address to open the product's web pages.
7. For information about how to set the password, see page 38.
Assign IP Addresses in Multiple Devices
AXIS Camera Management speeds up the process of assigning IP addresses to multiple devices by
suggesting IP addresses from a specified range.
1. Select the devices you wish to configure (different models can be selected) and click
Assign IP address to selected devices
2. Click Yes in the Device Maintenance dialog.
3. Select Assign the following IP address range and enter the IP address range, subnet
mask and default router the devices will use. Click Next.
4. Suggested IP addresses are listed under New IP Addresses and can be edited by selecting
a device and clicking Edit IP.
5. Click Finish.
Other Operating Systems and Methods
The list below shows the other methods available for assigning or discovering the IP address. All
methods are enabled by default, and all can be disabled.
• AVHS Service Connection (all operating systems). To connect to an AVHS service, refer
to the service provider's Installation guide. For information and help in finding a local
AVHS Service Provider, go to www.axis.com/hosting
• UPnP™ (Windows®). When enabled on your computer, the Axis network product is
automatically detected and added to Network/My Network Places.
• Bonjour (Mac OS X® 10.4 or later). Applicable to browsers with support for Bonjour.
Navigate to the Bonjour bookmark in your browser (for example Safari) and click on
the link to access the web pages.
• AXIS Dynamic DNS Service (all operating systems). A free service from Axis that allows
you to quickly and simply install your Axis network product. Requires an Internet
connection without an HTTP proxy. For more information, see www.axiscam.net
• ARP/Ping (all operating systems). See Assign IP Address Using ARP/Ping. The command
must be issued within 2 minutes of connecting power.
• DHCP server (all operating systems). To view the admin pages for the network DHCP
server, see the server's user documentation.
AXIS A1001 Network Door Controller
.
37