Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
1.
Raise take-up lever to its highest position by turning hand wheel toward you. Raise
presser foot.
2.
Place spool on spool pin as shown, with thread coming from the back of the spool.
3.
Draw thread into thread guide (1).
4.
Guide thread through tension disc (2) and pull it up.
5.
Draw the thread through take-up lever from right to the left (3).
6.
Then draw thread down (4) and slip it into the lower thread guide (5).
7.
Thread needle eye from front to back (6) and pull thread out under the presser
foot about 10 cm.
64
Texi Joy 25
Werbung
Kapitel
Inhaltsverzeichnis
