Maintenance Check - Qwic PERFORMANCE serie Bedienungsanleitung

Maintenance Check

The first maintenance visit is recommended after 250 km
(155 miles) or after 3 months from purchasing. Additional
service would be advised when necessary. For example
before the cycling season starts or before a long cycling
tour.
◊ Check the wheels and tires (dents in the rims,
spoke tension, tire pressure, tire profile)
◊ Tighten all mounting parts / bolts and nuts if necessary
◊ Check the brakes for wear and tear, adjust the
cable tension and check the brake function
◊ Check the headset for slack, check the steer stem and
adjust when necessary
◊ Clean the chain, put it to the right tension, and
lubricate with Teflon spray
MAINTENANCE
◊ Electrical system: Fully charge the battery, clean the
motion sensor with lukewarm water and sponge, use
contact spray for any contacts, grease the battery
contacts and battery rails with acid-free Vaseline and
check the complete drive train for any malfunction
◊ Derailleur: Make sure all the gears run smoothly,
adjust when needed
71