Maintenance Check - Qwic RD10 Bedienungsanleitung

Maintenance Check

The first maintenance visit is recommended after 250
km (155 miles) or after 3 months from purchasing.
Additional service would be advised when necessary.
For example before the cycling season starts or before a
long cycling tour.
□ Check the wheels and tires (dents in the rims,
spoke tension, tire pressure, tire profile)
□ Tighten all mounting parts / bolts and nuts if
necessary
□ Check the brakes for wear and tear, adjust the
cable tension and check the brake function
□ Check the headset for slack, check the steer stem
and adjust when necessary
□ Clean the chain, put it to the right tension, and
lubricate with Teflon spray
□ Electrical system: Fully charge the battery, clean
the motion sensor with lukewarm water and
sponge, use contact spray for any contacts, grease
the battery contacts and battery rails with acid-free
Vaseline and check the complete drive train for any
malfunction
□ Derailleur: Make sure all the gears run smoothly,
adjust when needed
Maintenance
91