Battery Charging - Qwic PERFORMANCE serie Bedienungsanleitung

Mounting the battery
Mounting the battery may require some practice. First
insert the designated key in the battery lock. Hold the
battery in two hands while standing on the left side of the
bicycle. Hold the handle of the battery at the top toward
you and carefully place the bottom part of the battery in
the frame. Now pivot the battery into the frame until you
hear a clicking sound. This is the lock that holds the battery
in place.
If it proves to be difficult to push the battery in its locking
position, try to open the lock while gently pushing the
battery in the
correct position.
It should be easier
this way. If the
battery is placed,
release the key
and check if the
battery is properly
locked.
50

Battery charging

With the supplied charger you can charge the battery. You
can charge the battery both on and off the bike.
The charging connection is covered by a rubber cap and can
be found at the bottom right side of the battery. Pull out
the rubber cap to insert the charger.
The charging connection battery
BATTERY & CHARGING