Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
approved aseptic techniques for Cavitron Inserts may result in
cross-contamination.
Precautions
It is the responsibilty of the Dental Healthcare Professional to
determine the approriate uses of this product and to understand:
• The health of each patient;
• The dental procedures being undertaken;
• The applicable industry and government agency recommendations
for the infection control in dental healthcare settings;
• The requirements, and regulations for the safe practice of
dentistry, and;
• These Directions For Use in their entirety.
• Operate the inserts only at the recommended power settings
with a minimum cooling water flow rate of 35ml per minute.
• Use only light contact pressure during use. Excessive pressure
may result in dampening of the ultrasonic activation of the insert
tip, decreased efficiency, possible soft tissue or tooth surface
damage and excessive wear of the diamond coating.
• Cavitron Ultrasonic Scaling Units and Cavitron Ultrasonic Inserts
are designed and tested for safety and efficacy as a system. Use
of any other brand ultrasonic equipment with Cavitron equipment
has not been tested and may have a negative effect on the safety
and effectiveness of your Cavitron equipment and their warranties.
Please review the warranty statement enclosed before use.
• Unlike diamond burs, Diamondcoat inserts are more susceptible to
damage by bumping and scraping. Care should be taken not to
damage the Diamondcoat insert tips during handling, sterilization
and storage.
• Sterilizing Diamondcoat inserts with items containing
oil must be avoided or damage to the material will result.
Adverse Reactions
None Known.
3
Werbung
Inhaltsverzeichnis
