Installation - Zanussi ZCG661G Benutzerinformation

Problem
There is no spark when lighting the
gas.
The gas ring burns unevenly.
The appliance does not operate.
The oven does not heat up.
The oven does not heat up.
The oven lamp does not operate.
Steam and condensation collect on
the food and in the oven.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to "Safety information" chapter.
32
Possible cause
The burner cap and crown are placed
unevenly.
The burner crown is blocked with
food residue.
The fuse in the fuse box is released.
The oven is not activated.
The necessary settings are not set.
The oven lamp is defective.
You left the dish in the oven for too
long.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
Remedy
Make sure that the burner cap and
crown are in correct positions.
Make sure that the injector is not
blocked and the burner crown is clear
of food particles.
Control the fuse. If the fuse is re-
leased more than one time, refer to a
qualified electrician.
Activate the oven.
Control the settings.
Replace the oven lamp.
Do not keep the dishes in the oven
for longer than 15-20 minutes after
the cooking ends.
.........................................
.........................................
.........................................