SOLAC PP7210 Gebrauchsanleitung Seite 9

MAIN COMPONENTS FIG. 1
1.- Switch
2.- Ceramic plates
3.- Cool touch points
4.- Hanging ring
5.- Closing ring
6.- Thermal bag
USER INSTRUCTIONS
• Place the straightener on a flat, heat-resistant surface.
• Plug it in. Press the switch Fig.1 (1).
• While the straightener is being heated to the suitable temperature, ap-
proximately 4 minutes, disentangle your hair and make sure that it is dry.
• The straightener will maintain its temperature.
• This model lets you shape the tips or add volume to your hair.
* To straighten: (Fig.2).
• Take a lock of hair and place it between the plates. Close them and slide
the straightener down the lock of hair from the roots to the tips.
• Repeat this operation until all your hair is completely straight.
• For best results, we recommend you begin with the lower layers of hair and
continue with the top layers.
• To slide the straightener more easily, we recommend you hold the straight-
ener with two hands, placing your fingers on the cool touch points (figure
1 (3)) to avoid burns.
* To curl tips outwards: (Fig. 3)
• Place the tip of the lock of hair between the plates and close them.
• Turn the straightener outwards as if it were a hairbrush.
• Keep it in this position for a few seconds.
* To curl tips inwards: (Fig. 4)
• Place the tip of the lock of hair between the plates and close them.
• Turn the straightener inwards as if it were a hairbrush.
• Keep it in this position for a few seconds.
Plancha PP7210 9
Do not leave the appliance unattended when connected.
Keep out of the reach of children.
9
14/12/06, 13:17:03