Husqvarna CA230 Bedienungsanweisung Seite 239

• Use protective boots with steel toes and non-slip
soles.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and branches.
Do not wear jewelry, short pants, sandals or go with
bare feet. Put your hair up safely above shoulder
level.
• Keep first aid equipment close at hand.
Safety devices on the attachment
WARNING: Read the warning instructions
that follow before you use the attachment.
This section contains the attachment's safety features,
its purpose and how checks and maintenance should be
carried out to ensure that it operates correctly. See
instructions under the heading
page 2 to find where these parts are located on your
attachment.
The life span of the attachment can be reduced and the
risk of accidents can increase if attachment
maintenance is not carried out correctly and if service
and/or repairs are not carried out professionally. If you
need further information please contact your nearest
servicing dealer.
WARNING: Never use an attachment with
defective safety components. The
attachment's safety equipment must be
inspected and maintained as described in
this section. If your attachment fails any of
these checks, contact your service agent to
get it repaired.
WARNING: All servicing and repair work on
the product requires special training. This is
especially true of the product's safety
equipment. If your product fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
742 - 002 - 13.12.2019
Attachment overview on
professional repairs and service. If the
retailer who sells your product is not a
servicing dealer, ask him for the address of
your nearest service agent.
To do a check of the cutting equipment
The tines are designed and machined to withstand the
loads resulting from cultivating.
The two basic rules:
1. Only use cutting attachments with the guards we
recommend!
2. Check the cutting attachment for damage or cracks.
A damaged cutting attachment should always be
replaced.
To do a check of the cutting attachment guard
This guard is intended to prevent loose objects from
being thrown towards the operator. The guard also
protects the operator from accidental contact with the
cutting attachment.
1. Ensure that the guard is undamaged and is not
cracked.
2. Replace the guard if it has been exposed to impact
or is cracked.
Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you do maintenance.
239