Operation; Troubleshooting Guide - babymoov Easy Care BC 64 Gebrauchsanleitung

A. NIGHT LIGHT BRIGHTNESS
ADJUSTMENT + VOX
VOX
TRANSMIT
VOX ON
POWER
Problem
No sound on the receiver
Transmission always on
Audible alarm
permanently activated
Battery life is short
Communication is frequently
interrupted or off
8
TROUBLE SHOOTING GUIDE
Possible cause
• The microphone's sensitivity is too low.
• The receiver volume is too low.
• The power adapter is not properly connected.
• VOX mode active.
• Batteries are empty/dead.
• The VOX mode sensitivity is too high.
• The receiver batteries are empty/dead.
• Distance between baby and parent unit exceeds
the operating range.
• Night light is permanently switched on.
• The transmitter and/or receiver are located near
other electrical appliances.
• Using the babyphone on a power strip.
• The two appliances are separated by metal
structures, thick walls, floors, etc.
• Baby unit battery has run down.
BABY MONITOR EASY CARE • Instruction manual

OPERATION

E. THE RECEIVER VOLUME
Solution
• Increase the microphone sensitivity.
• Increase the receiver volume.
• Check the connection.
• Press a button to activate the receiver.
• Replace with new/recharged batteries.
• Reduce the sensitivity of the VOX mode (2).
• Replace with new/recharged batteries.
• Move the baby & parent unit closer together.
• Switch off night light or set to VOX operate.
• Move the transmitter and/or receiver away
from sources of interference or re-set
the pairing.
• Do not connect your baby monitors to
power strips.
• Re-locate baby or parent unit.
• Replace with new battery or use AC adapter.