by the camera (3)
9.
more than one transmitter at a time, you will create
10.
longer be able to communicate with the receiver.
1.
(5) towards baby.
2. Turn on the transmitter by holding down the On/
(1)
battery icon (2)
button (1)
turn red. Change the batteries or used the 5V mains
3. Now, turn on the receiver by holding down the On/
(20)
low battery icon (10)
4.
on the screen (16)
(5)
(17)
(15)
volume will be restored to its initial level.
N.B.: The keys will work only when the icons
(
)are displayed. To activate them, hold
down the On/Off button (20). To avoid mistakes,
the icons will disappear after 8 seconds if no key
is used.
(3)
(3)
(17)
(12) (13). Volume
(16). To turn
(15) again. The
VISIO CARE
11.
the connection icon (11)
selected transmitter is disconnected.
OPERATION
5.
(2) will
6.
7.
level in baby's room, it automatically triggers the
screen (16)
8.
(20)
(4)
(20)
). Touch the menu icon (14)
(3)
(12) (13)
(20) to
13