Herunterladen Inhalt Inhalt Diese Seite drucken

Betrieb; Operation - Viessmann eMotion Bewegte Welt Bedienungsanleitung

Mit diorama-modus und integriertem digitaldecoder
Vorschau ausblenden Andere Handbücher für eMotion Bewegte Welt:
Inhaltsverzeichnis

Werbung

Abb. 3

5. Betrieb

Dieses eMotion Funktionsmodell ist für analogen
sowie digitalen Betrieb ausgelegt. Der integrierte Di-
gitaldecoder für die Formate DCC und MM (Märklin/
Motorola) ermöglicht die Steuerung über eine geeig-
nete Digitalzentrale (z. B. Viessmann Commander
Art. 5300/5320).
5.1 Funktionen analog
Für den Betrieb benötigen Sie ein Tastenstellpult
(s. Abb. 2) oder ein Schalterpult (z. B. Viessmann
Art. 5550). Bei Verwendung des Schalters ist aus-
schließlich der Betrieb im Diorama-Modus möglich
(s. Abb. 2 „Schalter-Betrieb").
5.2 Betrieb mit Tastenstellpult
Bewegung automatisch:
- Gewünschte Taste kurz drücken (< 1,2 Sek.).
Das Modell bewegt sich bis zur jeweiligen Endpositi-
on. Kurzes Drücken der Taste für die Gegenrichtung
stoppt die Bewegung sofort.
Bewegung manuell:
- Gewünschte Taste solange gedrückt halten,
wie die Bewegung dauern soll (> 1,2 Sek.). Die
Bewegung stoppt, sobald die Taste losgelassen
wird.
Digitalzentrale
Digital command station

5. Operation

This eMotion functional model is designated for
either analogue or digital operation. The integrated
digital decoder for the protocols DCC and MM
(Märklin Motorola) enables the user to control the
model via a digital command control station (e. g.
Viessmann Commander items 5300/5320).
5.1 Functions (analogue)
For operation of the model a push button panel
(see fig. 2) or a switchboard (e. g. Viessmann item
5550) is required. When using a switchboard as
in fig. 2 (small picture), only operation in diorama
mode is possible. Individual operation and control
is not possible.
5.2 Operation with push button panel
Automatic movement:
- Press the desired push button shortly (< 1,2 sec.).
The model moves until the selected end position is
reached. Pressing the push button for the opposite
direction stops the movement immediately.
Manual movement:
- Press the desired push button and keep it pressed
as long as the model is supposed to move. The
movement stops immediately if the push button is
released.
Fig. 3
MM / DCC
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis