Noise/Vibration Information - Bosch AdvancedImpact 18 QuickSnap Originalbetriebsanleitung

18 | English
Cordless drill/driver
Max. screw diameter
Chuck capacity
Tool holder
Weight according to EPTA-Procedure
01:2014
Permitted ambient temperature
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
B)
tion and during storage
Recommended batteries
C)
Recommended chargers
A) with adapter
B) Limited performance at temperatures <0 °C
C) The following chargers are not compatible with the PBA rechargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-1, EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1, EN 62841-2-2:
h
Drilling in metal:
a
h
K
Screwdriving:
a
h
K
Impact drilling into concrete:
a
h
K
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
1 609 92A 4SE | (25.07.2019)
AdvancedImpact 18
QuickSnap
mm
mm 0.8–10
6.42 (¼")
kg 1.4
°C 0 to +35
°C -20 to +50
PBA 18V...W-.
AL 18...
Advan- Drill chuck
cedIm- adapter
pact 18
QuickSnap
dB(A) 70
dB(A) 81
dB
3
2
m/s <2.5
2
m/s
2
m/s <2.5 <2.5
2
m/s 1.5
2
m/s 19.0
2
m/s
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
Drill chuck Off-set Angle screw
adapter angle ad-
apter
8 – –
– –
– 6.42 (¼")
A)
0.3 0.3
– –
– –
– –
– –
Off-set Angle Drill chuck
angle ad- screw ad- adapter +
apter apter angle
screw ad-
apter
88 70 70
99 81 81
5 3 3
- -
1.5 - -
<2.5 <2.5
1.5 1.5 1.5
- -
2.0 - -
Bosch Power Tools
adapter
–
–
6.42 (¼")
0.3
–
–
–
–
70
81
3
<2.5
1.5
<2.5
1.5
-
-