Cassettes And Tubes: „Cassette Large - Heidolph Hei-FLOW Value Originalbetriebsanleitung

Assembly
Cassettes and tubes: „Cassette large"
➜ Mount suitable tubes to cassettes.
(see chapter „Technical data, Table
tubes").
➜ Set tube size by moving slider to fitting
size.
➜ Mount Cassettes as described under
"Cassette small".
➜ Pull slightly at both ends of tube to
prevent an eventual loop.
➜ Press slider slightly inwards.
➜ Position the slider marking at the
prominent white lines according to
your tube size.
▪ Tube size 1.7, 3.1 to marking 16/14
▪ Tube size 4.8 to marking 25
▪ Tube size 6.3 to marking 17
➜ Turn adjustment knob clockwise till
inner side of wedge aligns with mark
on adjustment scale between figures
3 and 4.
„Cassette large" is suitable for multi-channel pump head C 8 only!
Tube size slider
Markings for tube sizes
Inner side of wedge
Adjustment scale
42
Adjustment knob