Start-Up; Setting Up Device; Switch Main Switch On And Off; Switch Unit On - Heidolph Hei-FLOW Value Originalbetriebsanleitung

Start-Up

Setting up device


➜ Locate the unit on a stable, horizontal surface.
➜ Clean surface and feet with a damp cloth and ethanol regularly.

Switch main switch on and off


The ON/OFF switch is situated on the back
side of the unit.
✓ ON/OFF switch is in „power off"
position.

Switch unit on

➜ Press ON/OFF switch.
✓ ON/OFF switch is in „power on" position.
Hei-FLOW Advantage
✓ The indicator light of actual direction illuminates.
Hei-FLOW Precision
✓ The settings are displayed in following order:
▪ set pump head (e. g. „Pu 1")
▪ gear ratio (e. g. „5")
▪ set inner tubing diameter (e. g. „3,1")
▪ possible back hub (z. B. „r on")
✓ The indicator light of actual direction illuminates.
✓ Unit is switched on.

Switch unit off

➜ Press ON/OFF switch.
✓ ON/OFF switch is in „power off" position.
Hei-FLOW Advantage, Hei-FLOW Precision
✓ All indicator lights power off.
✓ Unit is switched off.
Warning:
Risk of slipping device!
In operation the device might slide off the table top.
The surface must be smooth and clean and should be properly
leveled.
Start-Up
12