Fracarro Digiflex SIG9708CI Betriebsanleitung Seite 30

Programming the output frequency, the format and RF level of the output and the format and level of audio.
OUTPUT
Video Format
setting
RF level
adjustment
Enable/disable
the video test
Audio Output
adjustment
Audio level
adjustment
Verification of the software version of the headend, BER and S/N measurements. BER and S/N are approxi-
mate values.
MEASURES
Ber of the input signal
S/N of the input signal
confirm the settings by pressing the
4.8 OUTPUT
Set output
frequency
OUT FREQ. SEL. BY FREQ.
SEL. BY CHANNEL
VIDEO FORMAT Letter Box
RF LEVEL OFF
VIDEO TEST OFF
AUDIO TYPE OUT MONO
AUDIO LEVEL 0
confirm the settings by pressing the
4.9 MEASURES
Module software version
SOFTWARE REL.
BER
S/N (dB)
the modules programmation
STANDARD
FREQUENCY (MHz)
Increase/decrease of 0.25MHz by TPE arrows or enter the
value directly by the digit keyboard.
COUNTRY
OUTPUT CHANNEL
Adapted
OFF
15
0, 1, ..., 15
OFF
B&W
BLACK
B&W
MONO
STEREO
AUTO
DUAL SOUND
AUTO
10 0, 1, ..., 10
key; save the settings by pressing the S key after
the modules programmation
SIG9708 v.1
1,3*10E-4
11
key; save the settings by pressing the S key after
30
PAL-BG Read-only
48 860
Read-only
EUROPE
E2-E4
S3-S10
E2 E69 E5-E12
S11-S38
E21-E69
Letter Box
Pan Scan
Combined
Adapted - 16/9
1= undetected signal
0= undetected signal