Fracarro Digiflex SIG9708CI Betriebsanleitung Seite 24

IMPORTANT: Press the TPE key to save the settings. If this key is not pressed within 5 minutes
from the last modifications, the set data will be lost.
NOTE: if, during programming, the word "Wait..." often appears (for example, while channels are scrolled),
decrease the TPE programmer TIMEOUT to 3 seconds instead of 30 sec. To carry out this procedure, enter
the "TPE SETUP" – "TIMEOUT COM" menu and set it to 3 (see page 14 for the TPE SETUP menu).
In order to program and interpret the programming menu of the following flow-charts, refer to the following
tables:
TPE keys Key Function
To confirm an entered value or to select a menu
To cancel an entered value or exit a menu
To scroll through menu items
......
To enter values
To save the modifications
Graphic indications of
Meaning
the menu diagrams
Select the menu by using or keys and exit with the key
Scroll the menu to the right or to the left
Scroll the menu upwards or downwards
Scroll the value to the right or to the left
24