Safety Signs; Obvious Danger Points On The Linear Unit - RK Rose+Krieger SQZ-II Montageanleitung

5.3 Safety signs

These warning and command signs are safety signs which warn against risk or danger.
Information in these installation instructions on particular dangers or situations on the linear unit
is to be obeyed, as failure to do so increases the risk of accident.
The "General Command Sign" instructs you to be observant.
Special attention should be paid to marked information in these installation instruc-
tions.
It provides you with important information on functions, settings and procedures.
Failure to obey may lead to personal injury and faults on this controller or damage to
the environment.
The "Hot surface" warning sign warns against injuries from hot surfaces.
The warning sign "Danger! Hand injuries" warns that hands may be crushed, drawn
in or injured in some other way.
The warning sign "Danger! Risk of cutting" warns against injury to the hands.
This symbol marks the loose bearing side of the guide slot on linear units of the
"Roller" type.

5.3.1 Obvious danger points on the linear unit

5. Safety
51