Technical Data - Eta Delicca Mini Bedienungsanleitung

If you are unable to fix the problem, or if you need any further information about the
appliance or service centres, please contact your distributor.
VII
. FREQUENTLY ASKED QUESTIONS RELATED TO THE BREAD BAKER
Problem
The bread is hard
to remove from the
baking pan.
The bread baker
can not be turned
on. Display shows
H:HH.
VIII. ENVIRONMENT
If the size of the appliance allows, all the parts contain marking of the materials used
for production packaging, components and accessories as well as for recycling. The
symbols on the product or in the accompanying documentation mean that the electrical
or electronic product used must not be liquidated together with communal waste. To
ensure the appropriate liquidation take the used appliance to a collection point where it
will be accepted free of charge. Correct liquidation of the product helps to protect valuable
natural resources and helps to prevent a potential negative impact on the environment and
human health which can be the outcome of inappropriate liquidation of waste. More details
can be obtained from your local authorities or the closest collection point. Inappropriate
manipulation of such waste can result in a fine according to the national legislation.
IX. TECHNICAL DATA
Voltage (V)
Wattage (W)
Weight approx (kg)
Size of the product (mm)
Input in standby mode is < 1,00 W
Noise level: Acoustic noise level of 60 dB (A) re 1pW
The manufacturer reserves the right to change the technical specifications and
accessories for the respective models.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE
INSTRUCTIONS MANUAL
HOT, DO NOT COVER, CAUTION: BE CAREFUL OF STEAM, HOUSEHOLD USE
ONLY, DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
Cause
Bottom side of the
loaf is stuck on the
kneading blades.
The bread baker
is still hot from
previous baking
cycle.
shown on the type label of the appliance
shown on the type label of the appliancel
Solution
Move with the shaft backwards and
forwards until the bread comes out. Clean
the kneading hook and shafts after baking.
If necessary, fill the baking pan with warm
water for 30 minutes. Then, the kneading
blades can be easily removed and cleaned.
Press the START/PAUSE/STOP button to
cancel audio signal. Remove the baking
pan and let the baker cool down. Then,
return the baking pan back to its place, set
the program again and turn the baker on.
4.5
295 x 335 x 272
47 / 82
GB