Before You Begin - Matrix C3x Bedienungsanleitung

4
C3x
C3xe
1
3
2
4
8
Levelers
To attach end caps,
slide (1) over (2) and
then slide (3) into (4).
ASSEMBLY
C3x
C3xe COMPLETE!

BEFORE YOU BEGIN

LOCATION OF THE UNIT
Place the unit on a level and stable surface away from direct sunlight. The
intense UV light can cause discoloration on the plastics. Locate your unit in
an area with cool temperatures and low humidity. Please leave a clear zone
behind the unit that is at least 24" (610 mm). This zone must be clear of any
obstruction and provide the user a clear exit path from the machine. Do not
place the unit in any area that will block any vent or air openings. The unit
should not be located in a garage, covered patio, near water or outdoors.
HEIGHT REQUIREMENTS
The ClimbMill adds 30 - 38" (76 - 96.5cm) to a users height. For example, a
6' (183cm) tall user will be 8'6" - 9' 2" (259.5 - 279.5cm) off the floor.
TRAINING AREA
2.72 M
(107.1")
0.85 M
(33.5")
1.65 M
(65")
FREE AREA
2.72 M
(107.1")
0.85 M
(33.5")
2.26 M
(89")