Playing Usb Media - Nordmende Transita 320 Bedienungsanleitung

You can only undertake the programming if there is a disc in the closed CD
compartment and if the device is in stop mode.
Stop any playback in progress by pressing the  STOP button.
>
Press the PRESET button on your remote control.
>
The display shows [Memory P-01 and F-001 or T-01] for the first memory slot. (P = memory
slot, F = folder, T = track).
Depending on whether you want to program a music CD or a CD with mp3 tracks, the
display shows T for track selection or F for folder / album selection.
Use the up/down arrow keys on your remote control to select the first track to be
>
programmed (T-0X) or the first folder / album (F-00x).
If you programme an mp3 CD, you must press the PRESET button again after selecting
>
the folder and then select the title.
Save the desired track by pressing the PRESET button.
>
The display now shows [PR02] for the second programme slot.
> Use the up/down arrow keys on your remote control to select the second track/album
to program, then the track (for mp3 CDs). Then press the PRESET button again to save.
> Proceed in the same manner with all tracks to be programmed.
To play back the programmed tracks, press the  Play / Pause button.
>
Programmed playback is indicated on the display by [MEM DISC].
> To return to the normal sequence, press the STOP button twice or open the CD
compartment or switch off the radio. The programming is erased and must be carried
out again if desired.

8.6 Playing USB media

You can play audio files stored on a USB storage device on the Transita 320.
To play from a USB storage device, it must be connect to the USB connection at the back
of the radio.
The radio does not support the connection of USB media (hubs, etc.) via a USB
extension cable.
DE
EN
Page 69