Fm Radio; Setting The Frequency Manually; Search For Stations Automatically; Scan Setting - Nordmende Transita 320 Bedienungsanleitung

8.2 FM radio

Please also refer to the item Improve antenna reception in this instruction manual.
To select FM mode, press the MODE button until [FM Radio] appears on the display.
>
8.2.1

Setting the frequency manually

Press the up/down arrow keys to set the desired station frequency.
>
The up arrow key increases the frequency by 0.05Mhz, the down arrow key decreases the
frequency by 0.05Mhz.
In this way you can set a specific frequency to receive the desired station. If the frequency is set
correctly, the preset station will be indicated by name, if this RDS information is transmitted.
8.2.2

Search for stations automatically

As an alternative to manually setting a receiver frequency, you can also automatically search for
stations. Here the settings you have made in the menu under [Scan Settings] are applied.
Press the SCAN button to start the station scan. The scan ends when a sufficiently strong
>
station has been found.
> Repeat the procedure to search for another station.
8.2.3

Scan setting

In the menu, select [Scan Settings] and press the ENTER button.
>
Now select whether weak stations [All stations] are to be detected during the scan or
>
only strong stations [Only strong stations] and confirm your selection by pressing the
ENTER button.
Page 62