Station Information; Aux Input; Bluetooth; Activating Bluetooth - Nordmende Transita 320 Bedienungsanleitung

8.2.6

Station information

Some status information about the station is transmitted via RDS. By pressing the INFO button
several times, you can switch through or display this information.

8.3 AUX input

You can connect an external device (such as a smartphone/tablet) in order to play it from the
digital radio's speakers.
> Connect an audio cable (3.5 mm jack) from the audio output of your external device to
the AUX IN jack on the back of the radio.
To select AUX IN, press the MODE button until [AUX IN] appears on the display.
>
> For optimum volume setting, use the volume control on the radio, as well as the one on
the connected device. Set the volume on the connected device as high as possible and
then regulate the volume on the Transita 320. If the volume on the connected device is
set too low, you will probably hear interference in the sound.

8.4 Bluetooth

8.4.1

Activating Bluetooth

Press the MODE button on the remote control until [Bluetooth] appears on the display.
>
8.4.2

Pairing a Bluetooth device

If the Transita 320 has already been paired with another device which is within range, the
connection is automatically established.
> Activate Bluetooth on your music player, e.g. a smartphone or tablet.
If you activate Bluetooth on your music player, please consult the corresponding
instruction manual for the devices which you wish to pair with the Transita 320. Please
note that only 1 device can be connected with the Transita 320 at any time.
Page 64