Selecting The Track - Nordmende Transita 320 Bedienungsanleitung

When the CD compartment is open, ensure that no foreign objects can penetrate the
device. The lens of the laser sensor must not be touched under any circumstances.
Only open the CD compartment when the CD has stopped.
Insert the CD carefully with the printed side facing upwards. Ensure that the CD is not
positioned at an angle.
Close the CD compartment by pressing the Open/Close CD button again The CD is
>
then read.
Do not try to close the CD compartment by pressing it. This may damage the
mechanism.
After the reading process has finished the first track is played. The track number of the current
track, as well as the playing time, appear on the display. With mp3 CDs, the album number also
appears. If the CD is inserted incorrectly or if the CD appears to be faulty, [No CD] appears on the
display.
Do not perform any operation until the CD content has been completely read, to
ensure that all the required information on the CD has been read.
With mp3 CDs in particular, this process can take some time.
To insert/remove the CD, please hold it by the edge.
By pressing the  Play / Pause button you can pause playback (the playing time
>
appears on the display), or continue playback by pressing it again.
> The STOP button on the remote control stops the playback. The total number of
tracks appears on the display.
Always stop the playback prior to removing the CD.
8.5.4

Selecting the track

Use the Next track/Forward or  Previous track/Back button on the remote
>
control to skip to the next or previous track.
Use the up/down arrow keys to move to the folder / album. Folders and albums are
>
shown on the display with an "F".
The display shows the respectively set track number.
DE
EN
Page 67