Technical Data; Electric Heated Deepfat Fryers Series Minima; Installation Instructions; Data Plate For Electric Heated Deepfat Fryers Series Minima - MBM EF 46 Installations-, Betriebs- Und Wartungsanleitung

1.
1.1

ELECTRIC HEATED DEEPFAT FRYERS SERIES MINIMA

MODEL
EF 46
EF 66
*Feeding Power: 3N AC 400V ; 3 AC 230V ; IN AC 230V ; 50/60 HZ
N.B.: the absorbed power with 3N AC 380V ; 3 AC 220V ; 1N AC 220 V 50/60 HZ is around 9% lower than the values supplied.
The absorbed power with 3N AC 415V ; 3 AC 240V ; 1N AC 240V 50/60 HZ is around 9% higher than the values supplied.
2.
Installation must be performed by qualified technicians according to the law in force.
WARNINGS:
Should the unit be installed against a wall, the latter must be heat-resistant to temperatures of 100°C and must be fireproof;
otherwise, the application of a lagging material shall be absolutely necessary.
Before proceeding with the installation, remove the protective plastic film from the relevant parts, eliminating any adhesive
residues with an appropriate cleaning product suitable for stainless steel.
Install the unit in a horizontal position; its correct levelling will be achieved by rotating the adjustable feet.
The equipment can be separately installed or joined to other equipment belonging to the same range MINIMA.
This equipment is not suitable for embedding.
2.1

DATA PLATE FOR ELECTRIC HEATED DEEPFAT FRYERS SERIES MINIMA

The technical data plate is located on the back of the equipment.
2.2

LAWS, REGULATIONS AND TECHNICAL DIRECTIVES

The following indications should be observed during installation:
- Accident and fire regulations in force
- The regulations of the electric power supply company.
- Hygienic regulations.
- The rules for electrical systems.
DIMENSIONS IN mm.
ESTERNAL
W x D x H/H max.
400 x 600 x 270/420
600 x 600 x 270/420
MBM BRESCELLO - ITALY
RE37187/1998
V
KW
ABSORBED ELECTRIC*
TANK
Ltr.
12
12 + 12

INSTALLATION INSTRUCTIONS

Mod.
Matr. N°
-10-

TECHNICAL DATA

POWER WEIGHT
kW
9
9 + 9
HZ
NET
kg.
23
40