Dibo 1D CPU-S Serie Originalbetriebsanleitung Seite 58

E N
S a F E T y – G E n E R a l Wa R n I n G S
Machine:
never take the machine in use without water. Even a brief lack of water can
lead to serious damages! When the machine is connected to the drinking water
supply, the existing regulations about that must be observed (En 1717).
The machine must stand on a stable horizontal base with the brake on! Work at
artificial light: if daylight offers not sufficient visibility during the use, the use of
adapted impermeable lighting armature + stretches to recommendation.
In spaces provide with standard lighting these must remain on wide distance of
the water jet.
never work during adverse weather conditions (eg storm, rain, ...) in the open
air.
The machine at filling station or in other danger areas because of the explosion
danger, which can assume the burner, only uses outside the determined
danger area. Fixed adjustments of the machine can be modified under no
circumstances himself.
The high pressure cleaner has been made in running order and tested by DiBo
according to the safety standards.
never solvent holding fluids such as petrol, oil or dilution suck in, the arisen
spray veil can be extremely inflammable and/or toxic. When the machine is
in use these can never be left behind unattended. pay attention to sufficient
ventilation.
Machine does not cover or use in spaces with insufficient ventilation!
Vehicle tyres/tyre valves may be cleaned only with a minimum spray distance of
30 cm.
otherwise, the high pressure spray can cause damage to the vehicle tyre/tyre
valve.
The discolouring of the tyre is the first sign of damage. Damaged vehicle tyres
are a source of danger.
Do not spray materials containing asbestos or other health hazardous
substances.
Water exit:
See for a sound and smooth water outlet of the effluent. If there is cleaned
with detrimental chemicals or when the object to clean is strongly polluted, the
effluent must be purified before draining this in the sewer.
-
Usage of different products (cleaning product,
softener, decalcifier,...) (when applicable):
avoid adding chemicals or cleaning detergents to the water tank.
Read always firstly the regulations on the packing of the product.
Never clean with inflammable products. See for separate care/cleaning of
evacuation water.
See for the necessary personal protective equipment (glove, clothing, optical
device...).
Avoid spilling from a product. put the product tank directly beside the machine.
Remove the filling cap and hang the supply hose in the tank. Care always for a
ventilated hole in the filling cap!
Take care that the tank is always protected sufficiently against the used
medium.
Softener:
Special fluid for soften of hard and very hard water. application of this product
reduced considerably fastening on floating lime - and iron chloride parts on
heating spirals, piping, sprinkler heads etc. of heating equipment, high pressure
- and steam cleaners, etc.. a continuous use will extend the durability of the
machine considerably and improve simultaneously the output strongly.use
the DiBo softener (1.837.001/3.8550.650) , contact DiBo for more info. Good
softeners are:
• Biologically degradable
• ph between 6-9
• noT inflammable
DiBO 10