Skandika ADRETT Aufbau- Und Bedienungsanleitung Seite 35

Step 5
Loosen the screws (31) from the back of computer (24) and the grommet (46) from the side of front post
(02). Fix the stationery handlebars (06) on front post (02) with the Allen bolts (22) and guide the hand pulse
wire (42) through the hole on the side of front post (02) to the top and out of the front post (02). Attach
decorative cover (41) as shown in the drawing.
Connect upper sensor wire (13) and upper pulse wires (42) to the computer (24).
Fix the computer (24) to the bracket of front post (02) with the screws (31).
35