Samsung DVD-P355 Bedienungsanleitung Seite 14

C
O N N E C T I O N S
Connection to a TV (Progressive)
1
Using component video cables (not included), connect the
COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the AUDIO (red and white)
OUT terminals on the rear of the DVD player to the AUDIO (red
and white) IN terminals of your TV.
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.
4
Set the Video Output to Component (P-SCAN) in the Display
Setup menu. (See pages 53 to 54)
To see the progressive video output,
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
You need a TV set supporting the progressive scan input
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings
function. And you have to set up the TV menu to the
in the TV's menu system.
progressive scan input.
- Depending on your TV, the connection method may differ from the illustration above.
Note
- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
RED
RED
Audio Cable
RED BLUE
RED WHITE
ENG-14
BLUE
GREEN
WHITE
Component cable
(not included)
GREEN