Maintenance - PETZL ZIPKA E44 P Bedienungsanleitung

(EN) ENGLISH
TIKKA E43 P
Ultralight LED headlamp
ZIPKA E44 P
Retractable band version
TACTIKKA E46 P
Red or white light version.
The TIKKA, ZIPKA and TACTIKKA headlamps
meet the requirements of the 89/336/CEE
directive on electromagnetic compatibility.
Switching on and off
Push the switch all the way to switch on/off the
lamp.
Insertion of batteries
Use alkaline batteries. Warning, be careful to
insert the batteries correctly with respect to
polarity, as marked inside the case.
Do not mix different brands of batteries, or new
batteries with used.

Maintenance

The LEDs are not removable. After use in a
humid environment, remove the batteries and
dry out. If sea-water gets into the lamp, remove
the batteries, rinse thoroughly in fresh water
and dry.
If the lamp does not operate
Check that the batteries are not dead and are
correctly installed with respect to polarity. Check
that the contacts are not corroded. If corrosion
occurs, gently scrape it off without deforming
the contacts. If your lamp is still not working,
contact PETZL After-Sales Service.
ZIPKA E44P
Retractable reel precautions
This product is not designed for harsh
environments (avoid sand and mud).
- Take care to retract it slowly and do not
suddenly release it.
- Do not open the reel - the spring can cause
injury upon release.
- Do not put the band around the neck (the band
breaks at 20 kg) due to risk of strangulation or
cutting.
- The lamp is not recommended for children.
TACTIKKA E46 P
During transportation, the red fi lter should be
placed in the closed position to protect the LEDs
The PETZL guarantee
This product is guaranteed for 3 years against
all faults in materials or manufacture. Exclusions
from the guarantee: normal wear and tear,
modifi cations or alterations, incorrect storage,
damage caused by accidents, by negligence, or
by use for which this product is not intended.
Responsibility
PETZL accepts no responsibility for the
consequences, whether direct, indirect or
accidental, or for any other type of damage
arising or resultant from the use of this product.
2
Notice ZIPKA E44 P - TIKKA E43 P - TACTIKKA E46 P réf. : E46500-C
Additional information
PETZL LEDs are selected for superior
performance : they are robotically sorted and
individually tested, with only the brightest
chosen for use in PETZL headlamps.
L.E.D. Light-emitting diode
This information is to help you better understand
the lighting technologies incorporated into your
head lamp.
An LED is made up of 2 electrodes
with a light-emitting source (semiconductor)
placed on small refl ectors that channel
the light. The whole assembly is encapsulated in
a solid transparent resin which forms
a magnifying lens, and makes the LED
practically unbreakable. PETZL LEDs produce
a brilliant, diffuse white light, ideal for
proximity lighting. LEDs use the principle of
luminescence : a semiconductor excited by an
electric current emits light, while producing very
little heat. This results in very long battery life,
and a nearly unlimited lifespan for the LED.