Cognex In-Sight 8405 Bedienungsanleitung Seite 9

Install Software and Documentation
To configure an In-Sight vision system, In-Sight Explorer software must be installed
on a networked PC. In-Sight software is available as a free download from the In-
Sight support site, or can be purchased separately on a DVD.
Log On to the Vision System
1. Open the In-Sight Explorer software. From the Windows Start menu,
select: All Programs > Cognex > In-Sight > In-Sight Explorer x.x.x > In-Sight
Explorer x.x.x.
2. From the Get Connected Application Step, select your In-Sight vision
system from the Select an In-Sight Sensor or Emulator group box and press
the Connect button.
Vision System Specifications
Specifications
1
Case Temperature
Storage Temperature
Humidity
Protection
Shock (Shipping and
Storage)
Vibration (Shipping and
Storage)
1
Case temperature can be verified using the EVGetSystemConfig("Internal.Temperature") Extended Native Mode command. When
issued, it returnsthe vision system'sinternaltemperature in degreesCelsius, which willbe ±5 degreesabove the vision system case
temperature. Refer to the In-Sight
temperature cannot be kept below 50°C. Examplesof such measuresinclude: mounting the vision system to a heat sinkusing the M3
mounting screws, reducing the ambient temperature and ensuring there isair flow over the vision system.
0°C to 50°C (32°F to 122°F)
-20°C to 80°C (-4°F to 176°F)
< 80% non-condensing
IP30 with cables and lens attached.
IEC 60068-2-27: 18 shocks (3 shocks in each polarity in each (X, Y, Z) axis) 80 Gs (800
2
M/S at 11 MS, half-sinusoidal)
IEC 60068-2-6: vibration test in each of the three main axis for 2 hours @ 10 Gs (10 to
500 Hz at 100m/s2 / 15mm)
®
Explorer Help file for more information. Additionalcooling measuresare required if the case
In-Sight 8405
9