Fascia; Installing The Appliance - Gaggenau RW262 Gebrauchsanleitung

Fascia

1
2
1 Temperature selection buttons
The temperatures in the cabinet are set on the
display with the two buttons.
Upper refrigeration zone:
Press the upper button for 3 seconds the display
flashes.
Keep pressing the upper button until the required
temperature is displayed.
Lower refrigeration zone:
Press the lower button for 3 seconds the display
flashes.
Keep pressing the lower button until the required
temperature is displayed.
Note:
The refrigerator compartment temperature can be set
from +5 ºC to +22 ºC.The lower area of the cabinet
cannot be set warmer than the upper area.
2 Temperature display
Set temperature is displayed:
Briefly press the upper button
- The upper temperature is displayed.
Briefly press the lower button
- The lower temperature is displayed.
Note:
The temperature display features an integrated filter
which simulates the current bottle temperature.
Therefore, the display may not respond to brief
changes in the air temperature.
24

Installing the appliance

Install the appliance in a dry, well ventilated room. The
installation location should neither be exposed to direct
sunlight nor near a heat source, e.g. a cooker, radiator,
etc. If installation next to a heat source is unavoidable,
use a suitable insulating plate or observe the following
minimum distances to a heat source:
3 cm to an electric cooker.
30 cm to an oil or solid fuel cooker.