Skipping Tracks; Searching; Cd Text - Yamaha CDC-685 Bedienungsanleitung

BASIC OPERATION

Skipping Tracks

To play from the beginning of the
track following the one now playing
To play from the beginning of the
track now playing
To play from the beginning of the
track before the one now playing
• These operations can also be performed when the unit is
paused or stopped.
• When using the t or y button on the remote control
transmitter:
* If the button is pressed and held, the track number is
continuously changed to higher numbers (or lower
numbers).
• When using the t/e or r/y button on the front
panel:
* Be careful not to press and hold a button, otherwise
the selected track is played forward (or backward)
rapidly.
DIRECT PLAY
Select a desired track by using the numeric buttons.
1 2 3 4 5
SEARCH
5
The selected track number is displayed.
Example: To select track 25
Press 0 twice, then immediately press 5 once.
* If a track number higher than the highest track number
on the disc is selected, the last track on the disc will be
played.
10
E-
(Twice)
1 2 3
4 5 6
7 8 9
— 10
0
1DISC REP RNDM SAVE BEST EDIT FILE
5DISCS S F PROG CD- TEXT
1 2 3 4 5
TITLE ARTIST TRACK
6 7 8 9 10
11 12 13 14 15
16 17 18 19

Searching

To go forward rapidly
To go backward rapidly
• The sound can be heard (although slightly garbled)
during manual search in either direction. This is
convenient for locating a precise position within a track,
or for reviewing the contents quickly.
• Manual search can also be performed while disc play is
paused. In this case, no sound will be heard.
• When using the t/e or r/y button on the front
panel:
* Be careful not to release the button just after it is
pressed, otherwise the play is skipped to the begin-
ning of the next track or returned to the beginning of
the current track.

CD TEXT

This unit is compatible with the CD TEXT function. The
CD TEXT disc has information, such as the disc title, artist
names, and track names. If the current disc is a CD TEXT
disc, the unit reads the disc title, artist name, and track
names from the disc. You can display the CD TEXT data
(see "Selecting time displays and the text data" on page 7).
(Press and hold.)
(Press and hold.)