Operation; Basic Operation; Starting Playback - Yamaha cd s 700 Bedienungsanleitung

OPERATION

This manual describes how to operate this unit by using the remote control.
To operate this unit from the front panel, use the corresponding buttons on the front panel.
The Audio CD Data Disc ,
used in the operation.
1
Press POWER to turn on the power.
2
Press CD/USB to switch between disc mode
and USB mode.
When USB mode is selected, the USB indicator lights
up, and when disc mode is selected, the USB
indicator lights off.
y
This setting is retained even if you turn off this unit.

Starting playback

■ Playing back discs
Audio CD Data Disc
1
Press OPEN/CLOSE to open the disc tray,
and load a disc.
and USB icons indicate music data formats that can be

BASIC OPERATION

Notes
• When you load a disc, set the disc on the inside of the disc
• The disc may not be read correctly, if it is set incorrectly. In this
2
y
You can also close the disc tray by pressing h, a numeric button,
or by pressing the front edge of the disc tray gently. If the tray is
closed in one of these ways, playback starts automatically.
3
Label side up.
Disc tray
guides (4 marks on the disc tray).
case, open the disc tray and set the disc again.
Press OPEN/CLOSE to close the disc tray.
Press h to start playback.
For an Audio CD, playback starts from the first track,
and for a Data Disc, in alphanumeric order by
filename.
Display information in step 2
Audio CD
Total number of tracks Total recorded time of a disc
Data Disc
Total number of files
9
En