Setting The Time And Date Manually - Ventus AOK-5005E Bedienungsanleitung

Starting radio reception
When the device switches to receiving mode; the receiving symbol
waves on display indicates the quality of reception: The more radio waves on display, the better the
reception.
As soon as the signal has been received with sufficient strength, the corresponding information is shown on
the display and the radio tower symbol
The weather station will now switch to receive automatically several times a day and compare the time
displayed with the time received from the time signal transmitter.
If the signal strength is not sufficient , the base unit stops the receiving process and the radio tower symbol
is not displayed any more. The receiving process is then carried out again at a later time.
In this case, the time will continue as normal.
• First, check if the base unit is in a suitable location
• You can restart the receiving process manually or
• You can wait for the base unit to automatically switch back to receiving mode at a later time. The reception
is usually better at night.
• If reception is not possible at your location, you can set the date and time manually; see the next chapter

Setting the time and date manually

1. Press and hold the MODE button until the display for the hour format begins to flash.
2. Set the 24-HR or 12-HR with the
hours are shown with "AM" and afternoon hours are shown with "PM" on the display)
3. Press MODE to store the setting. The time zone will flash on the display.
4. Set the time zone (-12~12 seletable) with the
setting for continental Europe)
5. Press MODE to store the setting. The date foramt will flash on the display.
6. Set the date format with the
5. Press MODE to store the setting.
6. Continue as described:
ʌ
•MEM
- Set a value with
- Store a setting with MODE .
7. Set the following settings one after another:
- Year
- Month
- Day
- Hours
- Minutes
- Language (only refers to how the days of the week are displayed)
- Air pressure unit (hPa or inHg)
- Temperature unit (°C or F°)
is permanently displayed. This process can take a few minutes.
ʌ
•MEM
and V•HISTORY buttons. (in the 12-hour format, the morning
ʌ
•MEM
ʌ
•MEM
and V•HISTORY buttons (Day/Month or Month/Day).
and V•HISTORY .
will flash, and the number of radio
and V•HISTORY buttons. ("00" is the default