Product Description - Concept GE4010 Bedienungsanleitung

• Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool down before cleaning and after use.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.

PRODUCT DESCRIPTION

1. grill bowl
2. collection tray
3. heating element
4. grid
5. plastic lugs
6. handles
7. wind shield
8. shelf
9. legs
10. grill bowl support
11. heating indicator
12. temperature controller
NOTE
Prior to using a new unit, wipe the surface and the inside with a wet cloth for hygienic reasons.
Then turn on the unit without food at maximum temperature for 20 minutes (see the Operating Instructions below). It's
possible that the unit will emit a slight smell and smoke, which should disappear after a while. Air the room well during
this process.
ASSEMBLY INSTRUCTIONS
The appliance is supplied partially assembled. If not, please follow these assembly instructions.
1. First insert the collection tray (2) into the grill bowl (1).
2. Set the heating element (3) into the grill bowl (1).
3. When assembling the grill, please take care that the thermostat fits directly into the slide-in part at the front of the
appliance. The pins on the integrated heating element must be set into both respective slots at the front of the
appliance.
WARNING
The grill is equipped with an integrated safety switch to prevent the heating element from warming unless it is properly
18
5
6
2
4
11 12
3
7
8 3
9
EN
4
1
10
GE4010