Herunterladen Inhalt Inhalt Diese Seite drucken

Product Description - Concept GE4020 Bedienungsanleitung

Tischgrill
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23
• Do not immerse the power cord, plug, or appliance into water or any other liquid.
• Check the appliance and power cord for damage regularly. Do not switch on a damaged unit.
• Turn the unit off, unplug the power cord from the wall outlet, and let the unit cool down before cleaning and
after use.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer's instructions may lead to refusal of warranty repair.

PRODUCT DESCRIPTION

1. grid
2. heating element
3. collection tray
4. temperature controller
5. heating indicator
NOTE
Prior to using a new unit, wipe the surface and the inside with a wet cloth for hygienic reasons.
Then turn on the unit without food at maximum temperature for 20 minutes (see the Operating Instructions below).
It's possible that the unit will emit a slight smell and smoke, which should disappear after a while. Air the room well
during this process.
ASSEMBLY INSTRUCTIONS
The appliance is supplied assembled. If not, please follow these assembly instructions.
1. First, insert the collection tray (3) into the grill bowl (6).
2. Set the heating element (2) into the grill bowl (6).
3. When assembling the grill, please take care that the thermostat fits directly into the slide-in part at the front of the
appliance. The pins on the integrated heating element must be set into both respective slots at the front of the
appliance.
WARNING
The grill is equipped with an integrated safety switch to prevent the heating element from warming unless it is
properly set into the grill bowl. In order to ensure smooth operation of the appliance, the thermostat must be snapped
exactly into its place on the grill bowl. Otherwise, the heating element will automatically shut off or not turn on.
4. Put the grid (1) on the grill bowl. The grid has metal lugs on the sides. Set these lugs into the openings in the
collection tray.
5. Before using the table grill, please make sure all parts are securely assembled.
18
5
1
2
4
5
EN
GE4020

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis