BVC C 600 Bedienungsanleitung Seite 36

central vacuum cleaner
operation manual
Troubleshooting
The motor does not start
1. If the green lamp on the unit is off, the power supply is NOT OK.
Check the 230 V socket for voltage.
2. If the green lamp on the unit is on, the power supply is OK.
Start the BVC central vacuum cleaner by switching the I/O switch to „I"
If the motor does not start, the motor is defective.
Please contact your local BVC partner.
3. If the green lamp on the unit is on, the power supply is OK.
Start the BVC central vacuum cleaner by switching the I/O switch to „I"
If the motor can be started, the problem can either be caused by the
low-voltage transformer, the relay, the low-voltage installation or the
handgrip on the suction hose.
Please contact your local BVC partner or BVC EBS Distribution GmbH.
BVC EBS Distribution GmbH, Londonstr. 9, D-97424 Schweinfurt,
Tel. +49 (0) 97 21 / 78 57-0, Fax 0 97 21 / 78 57-29.
© 2016 BVC EBS Distribution GmbH, Schweinfurt
36