Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
SUGGESTIONS FOR PROPER POSITIONING
The appliance must be placed indoor
Position the insect destroyer preferably at a height of about 2 meters. Place in the darkest
part of the room, far from windows and sleeping areas. For use in bedrooms, turn on insect
destroyer at dusk, keeping shutters or blinds closed.

MAINTENANCE

Before attempting any maintenance operation, be sure that the appliance is un-
plugged from any electrical source.
The Company declines any responsibility for accidents or malfunctions caused
by a lack of a reasonable maintenance.
• Empty and clean out electrocuted insects from the insect collector drawer every 2 or 3
days or more often if the insects reach the rim. If electrocuted insects falling directly to
the ground is not bothersome, the drawer can be eliminated completely. Each time the
drawer is emptied, cleaning of the lamp and grids is suggested (at least once a week).
• For maximum efficiency, replace the lamp only with the type indicated on the device
every 2000 of working hours. Apply to an authorized Technical Assistance Center for the
replacement of the lamps.
• Model 7103, being doubly insulated, do not require a grounded electrical supply.
TECHNICAL SERVICING
• In case of damage, the electric cord must be replaced only at an authorized Technical As-
sistance Center; special tools are needed for this operation.
• In case of breakdown or malfunction of the device, apply to an authorized Technical As-
sistance Center and ask them to use original spare parts.
TECHNICAL DATA
Power supply:
Discharging power:
Insulation Class:
UV-A lamp:
Lamp life:
Power consumption:
Range:
Weight:
Dimensions (cm):
220-240 V ~ 50-60 Hz
24 x 12 (diameter)
6
5000 V
II
1 x 4 W
2000 h
4 W
2 ÷ 4 m
1 kg

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis