Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
IMPORTANT SAFETY INSTRUCTIONS
Before using your appliance, read carefully the instructions contained
in this booklet, which furnish important information regarding instal-
lation, use and maintenance safety. The booklet must be keeped and
delivered to the new user in case of cession of the machine.
The Manufacturer reserves the right to vary the features of the product
without prior notice. The technical data are merely indicative.
This electrical device is manufactured in accordance to HACCP food-
processing directive (CE 93/43-96/3-DL 155/97). It has been manufac-
tured in accordance with the 2006/95/CE Low-Tension Directive and
the 2004/108/CE Electromagnetic Compatibility Directive.
The Company declines any responsibility for accidents to persons, to
things and to the environment as well as malfunctions of the appliance
caused by:
• A lack of a proper maintenance of the machine.
• The alteration of the configuration or original structure of the device.
• An operation or usage unrelated to the terms described in the con-
tent of this manual of instructions.
GENERAL WARNINGS
• This appliance is intended exclusively for the use for which it was
created, that is the destruction of the flying insects, and the Manu-
facturer would not be considered responsible for any damage
caused by its improper use.
• Before use remove all packing materials from the appliance.
• In order to avoid danger of suffocation, keep the packing materials
away from babies and children.
• The appliance is not suited for persons (as well as children) physi-
cally, mentally, sensory disabled, or with no experience, unless they
have been supervised or directed by someone responsible of their
safety.
• Children should be supervised to ensure that they do not play with
the appliance.
• Do not let children or incompetent people use device without su-
pervision.
• Do not use if unit is damaged.
• Before inserting the plug make sure that the voltage is the same as
indicated on the device.
• The energy supply must be done through a properly grounded
socket.
• Do not plug in the appliance in presence of inflammable materials,
gas or liquids.
• Do not operate the appliance with wet hands or feet.
• Do not use if cord or plug is damaged.
• Keep cord away from heat.
• Do not use adapters or multiple plug electric suppliers.
• Unplug unit when not in use.
• Do not unplug by pulling the wire, unplug acting directly from the
plug.
• Always unplug the appliance before doing any maintenance opera-
tion.
• Do not spread any inflammable liquid, gas or material on the ap-
pliance.
• Place the appliance on furniture, shelf or hanged on the ceiling or
on the wall.
• If the power supply cord is damaged avoid to use it. Let the Manu-
facturer, or the After Sale Service, or some similar qualified person
replace it, in order to avoid any risk.
• In case of malfunction, verify the correct operation of the electric
installation: whether it was right but the appliance still shows prob-
lems a qualified technical service will be able to do any repairing.
• For a best appliance's performance use only spare parts supply by
the Manufacturer.
505372-397 en de fr ma 2012
USE AND MAINTENANCE
HOW THIS APPLIANCE WORKS
The special UV-A lamps are set to attract all flying insects to the ap-
pliance. When insects approach they remain stuck on the glued paper
(supplied as a spare part). This appliance allows monitoring and captur-
ing the flying insect within the environment nearby.
MAIN FEATURES
• Inox AISI (mod.372) or painted metal (mod.397) structure: appropri-
ated to be used in food-processing environments.
• Shatter-proof lamps: in case of breaking, a special protective film
placed on the external side of the lamp would avoid any small piece
of glass to contaminate the environment where the device is placed.
• IP65 protection degree: it means that the appliance is protected by
water spouts, this allows its utilisation even in environments with
high levels of humidity.
INSTALLATION
The appliance can be installed on a flat surface, hanged on the ceiling
or wall mounted. An electrical outlet must be present nearby.
When wall mounted, it must be fixed with two screws placed on the
wall. Position the appliance preferably at a height of about 2 m placing
it in the darkest area of the room, far from windows. This because the
appliance must eliminate insects from indoors and must avoid attract-
ing other from outdoors inside the room. The wall should be free from
obstructions to allow easy removal of the glued paper and the cleaning
of the appliance. Make sure that the wall where you plan to mount the
appliance is solid, you can locate some inserts to provide an adequate
support for the screws.
• Using a 9 mm drill bit, you must drill two holes of 7 mm into the wall
and insert the wall inserts into the holes.
• Next place the screws into the inserts leaving the head of the
screws far from the wall 1 cm at least.
• Once the screws are securely mounted into the wall, hang the appli-
ance by introducing the head of the screws in the apposite eyelets
that you find in the upper part of the appliance as shown on (Fig.1).
MAINTENANCE
Before any maintenance or cleaning of the appliance make sure
that the device is unplugged from the electrical wall socket.
In case of malfunction take the appliance to the nearest author-
ised technical service centre or to your re-seller.
The glued paper must be replaced at least once a month or more if the
environment is full of insects or very dirty (Fig.2). A general cleaning of
the appliance must be done periodically, and each time that the glued
paper is changed. For this operation you must use a cleaning substance
suitable to be used within food-processing environments. Once the
cleaning operation is finished, set a brand new glued paper on its place.
All maintenance operations must be done on a table or on the floor,
so if the appliance is wall mounted or hanged it must be temporarily
removed, to allow any maintenance operation.
• Take the protective film off the glued paper, place it on the base of
the appliance avoiding sticking it on the lamps.
• In case the glued paper sticks on the lamps, you must clean them
with a soft cloth with a non-corrosive detergent avoiding scratching
the plastic protection of the lamp.
• For a best performance of the appliance, we suggest an annual sub-
stitutionof the lamps.
• All rejected or used glued papers must be drained in accordance to
the local regulations in which the appliance is settled.
TECHNICAL ASSISTANCE
If you have questions regarding your appliance call your dealer. In case
of breakdown, malfunction or damage turn the device off and take or
send it to the nearest assistance centre.
Only authorised technical assistance centres using original parts must
do any repair.
Werbung
