Selecting A Sound Field Program - Yamaha HTR-5830 Bedienungsanleitung

Selecting a sound field program

You can enhance your listening experience by selecting
sound field programs. For details about each program, see
pages 28 – 31.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT NEXT
PHONES SPEAKERS STEREO PROGRAM
A/B/OFF
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
1,2
q/DTS 6.1/5.1
TEST
VOLUME
PROG
LEVEL
VOLUME
1
Press PROGRAM l / h (or PROG –/+ on the
remote control) to select the desired
program.
The name of the selected program appears on the
front panel display.
PROGRAM
Front panel
VCR V-AUX
Adventure
y
• Select a program based on your listening preference. Program
names are just for reference.
VOLUME
FREQ/TEXT EON
PTY SEEK
MODE START
PRESET/TUNING MEMORY TUNING MODE
SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO
INPUT
INPUT MODE 6CH INPUT
NIGHT SLEEP
STEREO
PROG
MUTE
SET MENU
1,2
PROG
or
Remote control
DTV/CBL DVD MD/CD-R TUNER CD
VOLUME
L C R
SL
LFE
2
After selecting the desired program, press
the same button repeatedly to cycle through
sub-programs if available.
Example:
PROGRAM
Front panel
Notes
• There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
format and not all sub-programs can be used with all input
signal formats.
• You cannot use the digital sound field processor with a source
connected to the 6CH INPUT jacks of this unit or when the
unit is reproducing a digital source with a sampling frequency
greater than 48 kHz.
• The acoustics of your listening room affect sound field
programs. Minimize sound reflections in your room to
maximize the effect created by the program.
• When you select an input source, this unit automatically
selects the last sound field program used with that source.
• When you set this unit in standby mode, it stores the current
source and sound field program in memory and automatically
selects them when you turn on the power again.
• If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the sound field program (No. 7–9)
PROG
automatically switches to the appropriate decoding program.
• When the unit is reproducing a monaural source with PRO
LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound is output from the front and surround speakers.
Sound can only be heard from the center speaker. (If "1A
CENTER" on the set menu is set to NONE, the center channel
sound is output from the front speakers.)
dB
SR
PLAYBACK
Pressing MOVIE 2 repeatedly
switches the sub-program between
"Adventure" and "General".
PROG
or
Remote control
VCR V-AUX DTV/CBL DVD MD/CD-R TUNER
General
PROG
CD
VOLUME
dB
L C R
LFE SL SR
25