More About This Unit - JVC KD-DV7301 Bedienungsanleitung

More about this unit

General
Turning on the power
• By pressing SRC on the unit, you can also turn on the
power. If the source is ready, playback also starts.
FM/AM/RDS
Storing stations in memory
• During SSM search...
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in No. 1 will
be automatically tuned in.
• When storing stations, the previously preset stations
are erased and stations are stored newly.
FM RDS operations
• Network-Tracking Reception requires two types of
RDS signals—PI (Programme Identification) and AF
(Alternative Frequency) to work correctly. Without
receiving these data correctly, Network-Tracking
Reception will not operate correctly.
• If a Traffic Announcement is received by TA Standby
Reception, the volume level automatically changes to
the preset level (TA VOL) if the current level is lower
than the preset level.
• When Alternative Frequency Reception is activated
(with AF selected), Network-Tracking Reception is
also activated automatically. On the other hand,
Network-Tracking Reception cannot be deactivated
without deactivating Alternative Frequency
Reception. (See page 44.)
• If you want to know more about RDS, visit
<http://www.rds.org.uk>.
50
Disc/USB
General
• In this manual, words "track" and "file" are
interchangeably used.
• This unit can also play back 8 cm discs.
• This unit can only play back audio CD (CD-DA) files if
different type of files are recorded in the same disc.
• This unit can display only one-byte characters. No
other characters can be correctly displayed.
• When a disc is inserted upside down, "PLEASE" and
"EJECT" appear alternately on the display. Press
eject the disc.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust. Playback starts
automatically.
• After ejecting a disc or removing a USB device,
"NO DISC" or "NO USB" appears and you cannot
operate some of the buttons. Insert another disc,
reattach a USB device, or press SRC to select another
playback source.
• If you change the source, playback also stops.
Next time you select the same source again, playback
starts from where it has been stopped previously.
• While playing from a USB device, the playback order
may differ from other players.
• This unit is compatible with the USB Full-Speed.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be loose.
• When connecting a USB device, refer also to its
instructions.
• Connect one USB device to the unit at a time. Do not
use a USB hub.
• If the connected USB device does not have the correct
files, "NO FILE" appears.
0
to