capital sports Azura Fusion Benutzerhandbuch Seite 28

EN
28
Assembly
Take the frame out of the box and
lay it flat on the floor. Check the pin
(68) and make sure it is properly
fastened in the two holes. Then
1
slowly open the frame. You can
adjust the unfolding height by
inserting the pin (68) into the right
hole as soon as the height is correct.
Remove the cap nuts (44), washers
(43) and screws (41) from the front
stabilizer (40) and rear stabilizer
(45) and keep them in a safe place.
Attach the front stabilizer (40) to
2
the main frame (1) using transport
rollers and reattach the cap nuts
(44), washers (43) and screws (41)
to the front stabilizer (40) and rear
stabilizer (45).