air&me Clevair 2 Bedienungsanleitung Seite 13

Functions
②
HygroSmart
®
HygroSmart® is an exclusive technology patented by Air&me. Below 48% of humidity,
the HygroSmart® function turns on. If it is above 53%, the function automatically turns
off. Everything is done for an ideal hygrometry rate!
Once the on/off button is activated, press the HygroSmart once (2). If the humidity
of your room is below 48%, the HygroSmart® function turns on and will turns off once
the range is reached. If the hygrometry rate of your room is enough, the function will
not start.
③
Hygrometry
Once the on/off button is activated, the digital panel indicates the humidity rate of the
room thanks to the sensor situated on the power cord (margin of error +/- 5%). You can
adjust the desired hygrometry rate between 30 and 75%.
• Press the hygrometry button (3)
• Adjust the rate pressing the button several times. It will increase 5% by 5%.
• Once the rate is chosen, after 3 seconds, the digital display will indicate the hygrometry
rate of the room until it reaches the desired rate.
③
Continuous mode
Press the hygrometry button (3) until you see the "CO" symbol to activate the continuous
mode. Once you have selected the mode, the digital display will indicate the humidity
rate of your room after 3 seconds.
Power
Clevair 2 has 3 power levels (Low – Medium - High). It will allow you to increase the
humidification speed and to regulate the mist intensity.
Caution: at maximum power, it is possible that the mist falls back and creates
condensation around the appliance which could be wrongly identified as a leak. In
order to avoid that, reduce the power level and/or place the humidifier near a heat
source, on furniture at more than one meter height.
C
%
%
®
Low
C
%
%
®
Medium
C
%
%
®
High
13