air&me Clevair 2 Bedienungsanleitung Seite 12

Clevair 2 helps preventing dry air symptoms by humidifying the ambient air thanks to
a cold or warm mist. An air humidifier is efficient against dried mucous membranes,
nose bleeds, rhinitis, eye irritation, dry skin, dry cough or nocturnal thirsts. In terms
of hygiene and comfort, Air&me recommends a relative humidity (hygrometry)
between 40 and 60%.
Puissance d'humidification
®
①
ON - OFF
②
HygroSmart
③
Hygrometry
④
Ionizer function
⑤
Mist power
⑥
Warm mist mode
Operating instructions
Before starting Clevair 2, check that
the product is unplugged.
• Place the humidifier on a flat surface,
at least 60 cm above the floor and
10 cm from the wall.
• Fill the tank (see instructions below).
• Plug the power cord in an electrical
socket.
• Turn the appliance on using the on/
off button.
How to fill the tank
• Take the tank by the handle and lift it.
• Turn the tank over, unscrew the cap (follow the "WATER"
arrow) and fill the tank with cold water. Do not fill it with
hot water, it could create some leaks.
• Screw back the cap clockwise.
• Replace the tank on its base, using the float as a guide.
®
(F)
%
-
(A) (B) (C) (D)
+
ION
(E)
%
①
② ③
®
⑥
④
⑤
• Press the buttons of the touch control
panel to select the different modes.
• Clevair 2 humidifier automatically
turns off when the tank is empty.
Thermometer
C
Hygrometer
(A) Empty tank indicator
(B) Ionizer indicator
(C) Warm mist indicator
(D) HygroSmart® indicator
(E) Hygrometry indicator
(F) Diffusion power
Turn the tank
over to fill it.
12