Intended Use - Steelcase Migration Desk & Bench Kurzanleitung

Injuries to persons or damage to the desk are possible!
Ensure that
the desk is regularly serviced;

the desk is not used if damaged;

only spare parts are used that originate from the manufacturer. (

and contact
Risk of damage to material!
Only use polishing and cleaning agents that are suitable for the respective materials

(wood, plastics, metals).
2. Technical data (electrical height adjustment)
Dimensions and weight
Mains voltage
Rated current
Rated frequency
Maximum load capacity
Maximum "on" duration
Maximum adjustment range:
Single telescope Lift 1; double telescope Lift
2 and Lift 3
Noise emission
Max. power consumption for the lift process
– 2 telescopic columns per desk
Power consumption in standby mode
Up/Down
control panel
Memory
control panel
Type plates are located on the controller housing, on the telescopic columns,
and on the underside of the desktop.

3. Intended use

Intended use also includes following all instructions in the user manual.
The Migration / Migration Bench is designed exclusively to be used as office furniture for commercial
purposes. Any other use, or use beyond the specified intended use is considered to be improper use.
Improper use of the product can result in dangers to life and limb as well as property damage. For this
reason, improper use is prohibited. In case of improper use, Steelcase assumes no liability for any
142821
)
Migration / Migration Bench – two table legs each
See delivery note
220-240 VAC
2 A
50 to 60 Hz
50 kg
2 min
720 mm to 1200 mm
650 mm to 1250 mm; (620mm to 1280 mm)
<60 dB (A)
240 W
0.1 W
Standard
Optional
~
ON OFF
/ 18 min
Migration
see 7. Servicing
Rev. A
EN