Error Codes - Steelcase Migration Desk & Bench Kurzanleitung

5.4 Switching the indicated unit (cm/inch) (Memory control panel)
 Press the buttons 1, 2 and "Up" at the same time and hold for three seconds; then release the
buttons.
S and a number (e.g. S 7) are indicated on the display.
 Press and hold the "Up" button until S 5 is indicated on the display.
S 5 is indicated on the display.
 Press the Memory position button.
If the display was previously set to centimetres (cm), it will now be switched over to inches (inch)
and vice versa.

6. Error codes

Error codes are always indicated on the display with an "E" for error followed by a number. The most
common error codes are also provided with an extra function such as "E01" or "INITIALISE". The
display alternates between a numeric code and a text message. The error code is indicated for as long as
the toggle switch remains pressed.
The most important error codes:
EN
A complete list of error codes can be found in the detailed operating
instructions (www.steelcase.com/eu-en)
7. Service and contact details
Manufacturer
Steelcase AG
Brienner Str. 42
80333 München
142821
E60 COLLISION
E67 OVERLOAD
HOT OVERHEATING
Phone: +49 (0) 80 31 405 – 111
E-mail: DE lineone-de@steelcase.com
EN lienone-en@steelcase.com
FR lineone-fr@steelcase.com
ES posventaspain@steelcase.com
Migration
Rev. A