Philips FC8778 Bedienungsanleitung Seite 19

English
22
Problem
The robot does not
respond when I press one
of the buttons.
The warning indicator
flashes quickly. At the
same time, you receive a
push notification in the
app telling you more
about the issue.
The robot does not clean
properly.
Possible cause
The robot is in deep sleep
mode.
The robot's rechargeable
battery is empty'.
One or both wheels are stuck. Remove the fluff, hair, thread or wire that
One or both side brushes are
stuck.
The top cover is not present
or is not closed properly.
The bumper is stuck.
The robot was lifted while it
was cleaning.
The bristles of one or both
side brushes are crooked or
bent.
The filter in the dust
container is dirty.
Solution
Press the start/stop button for one second
to reactivate the robot.When you press the
start/stop button briefly again, the robot
starts cleaning. If the rechargeable battery
is empty, the robot does not respond. In
that case, place the robot on the plugged-
in docking station.
Place the robot on the plugged-in docking
station. After a few seconds, the robot
beeps and the display lights up.
is caught around the wheel suspension.
Clean the side brushes (see 'Cleaning the
robot').
When the top cover is not present or is not
closed properly, the robot does not work.
Place the top cover on the robot properly.
Lift the robot so that its bumper comes
free. Place the robot at some distance
from the obstacle and press the start/stop
button briefly to make the robot resume
cleaning.
Place the robot on the floor. Then press
the start/stop button briefly to make the
robot resume cleaning.
Soak the brush or brushes in warm water
for a while. If this does not restore the
bristles to their proper shape, replace the
side brushes (see 'Replacing the side
brushes').
Clean the filter in the dust container with a
cloth or a toothbrush with soft bristles. You
can also clean the filter and dust container
with a regular vacuum cleaner at a low
suction power setting.
If brushing or vacuuming does not help to
clean the filter, replace the filter with a
new one. We advise you to replace the
filter at least once a year.